Truckbed Liner is a two component, urethane, textured coating that provides superior adhesion, film build and flexibility to truckbeds and restoration projects.?
Features Applications Properties Durable, slip resistant, non-corrosive coating Outstanding adhesion and chemical resistance Will not fade Bonds to most surfaces Tintable version to match OEM colors Sound dampening properties Air and water tight Steel Aluminum Concrete Wood Fiberglass SMC Existing OEM Paint Black or Tintable kits Contains: 1 gallon Truckbed Liner, 1 quart Catalyst, two Schutz cans and 1 paint mixing pail Coverage: 125 sq. ft./gallon -
Check local VOC
regulations to ensure
compliance of all
products in your area.
SEM Products, Inc. 1685 Overview Dr. Rock Hill, SC 29730 866.327.7829 semproducts.com
TRUCKBED LINER
TECHNICAL DATA SHEET
DESCRIPTION
Truckbed Liner is a two component, urethane, textured coating that provides superior adhesion, film build and
flexibility to truckbeds and restoration projects.
FEATURES
Durable, slip resistant, non-corrosive coating
Outstanding adhesion and chemical resistance
Will not fade
Bonds to most surfaces
Tintable version to match OEM colors
Sound dampening properties
Air and water tight
SUITABLE SUBSTRATES
Steel
Aluminum
Concrete
Wood
Fiberglass
SMC
Existing OEM Paint
TYPICAL PROPERTIES
Part: Product Name: Color: Container:
39630 Truckbed Liner Kit Black Kit
39650 Tintable Truckbed Liner Kit Gray Opaque Kit
Containers: 5 quart kit
Kit Contains: 39630 / 39650 �C one gallon Truckbed Liner, one quart
Catalyst, two Schutz cans and one paint mixing pail
Solvent Resistance: No color transfer with 100+ double rubs (ASTM D 5402)
RTS VOC: 1.65 #/gl (198 g/L)
Pot Life @ 70��F (21°C) and 50% R.H. 20 minutes
Coverage: 125 ft2 per gallon
Optimum Film Thickness: 15-20 mils
Check local VOC
regulations to ensure
compliance of all
products in your area.
SEM Products, Inc. 1685 Overview Dr. Rock Hill, SC 29730 866.327.7829 semproducts.com
Dust Free Time: 1-2 hours
Heat Cure Recommendations: 45 minute flash, 1 hour at 120oF (49°C)
Delivery Time: 8 hours (air dry), allow 48 hours before use of truckbed
Use a VOC calculator to determine VOC of mixtures.
HANDLING AND APPLICATION
PREPARATION:
BARE METAL, ALUMINUM AND EXISTING OEM PAINT
1. Pressure wash the surface.
2. Clean with SEM Solve or Zero VOC Surface Cleaner.
3. Sand the surface with 180-220 grit paper or use a bed brush as directed per manufacturer's instructions. If rust
is present, grind or sandblast until all rust is removed. Apply a two component epoxy primer, such as World
ClassTM DTM Primer or Metalock DTM High Build Primer, or apply a two component direct-to-metal urethane
primer over any bare metal following the manufacturer's instructions.
4. Sand the primer with 180-220 grit paper. Blow off dust and tack clean.
FIBERGLASS AND SMC
Clean with SEM Solve or Zero VOC Surface Cleaner.
Note:
Surface must be completely dry, avoid saturating panel with cleaner. Sand the surface with 180-220 grit paper,
blow off dust and tack clean.
WOOD
1. Pressure wash surface first and allow to fully dry.
2. Sand the surface with 180-220 grit paper, blow off the dust and tack clean.
Note:
Treated wood may interfere with adhesion.
CONCRETE
Pressure wash surface and allow to fully dry.
MIXING:
Note:
Do not catalyze more than 1 quart of Truckbed Liner at a time due to the short working time.
Check local VOC
regulations to ensure
compliance of all
products in your area.
SEM Products, Inc. 1685 Overview Dr. Rock Hill, SC 29730 866.327.7829 semproducts.com
BLACK TRUCKBED LINER
Mix by volume:
4 Parts 1 Part
Truckbed Liner Black Catalyst
Hand stir thoroughly for 1-2 minutes.
TINTABLE TRUCKBED LINER
Tint with solvent based automotive type paint. Omit any binders, balancers or reducers called for in the formula -
use color only. Do not use water based or lacquer based colorants.
First, mix by volume:
8 Parts 1 Part
Tintable Truckbed Liner Tint
Then, mix by volume:
4 Parts 1 Part
Tinted Truckbed Liner Catalyst
Hand stir thoroughly for 1-2 minutes.
APPLICATION:
Coats: 2-3 Light Coats
Flash Time between Coats: 15-20 minutes @ 70°F
Air Pressure: 45-90 psi
The Pro-TexTM Truckbed Liner Gun or Premium Undercoat Gun is recommended to apply Truckbed Liner
properly.
Note:
Applicator guns may need to be cleaned between coats, especially in hot and/or humid conditions.
IMPORTANT!
In hot and/or humid conditions, you must apply lighter coats and allow longer flash times between coats. Truckbed
liners applied too heavily too quickly may blister or crack after cure. The first coat should not achieve full coverage
and subsequent coats should be applied in the same manner.
CLEANUP:
Remove all masking tape while final coat is still wet.
Use appropriate cleaning materials compliant with VOC regulations in your area for cleaning equipment.
Check local VOC
regulations to ensure
compliance of all
products in your area.
SEM Products, Inc. 1685 Overview Dr. Rock Hill, SC 29730 866.327.7829 semproducts.com
STORAGE:
Truckbed Liner should be stored between 60-80oF (16-27°C). The shelf life for Truckbed Liner is 3 years when
stored under normal conditions.
RELATED PRODUCTS
Part: Product: Size:
38371 SEM Solve Gallon
38373 SEM Solve Aerosol
38374 SEM Solve Quart
38375 SEM Solve 5 Gallon
40401 Zero VOC Surface Cleaner Gallon
40404 Zero VOC Surface Cleaner Quart
50121 DTM Primer Gallon
50124 DTM Primer Quart
50134 DTM Primer Activator Quart
50136 DTM Primer Activator 1/2 Pint
ML010 Metalock DTM High Build Primer Kit 5 Quart Kit
ML014 Metalock DTM High Build Primer Kit Quart
MLH16 Metalock Hardener 1/2 Pint
71001 Pro-Tex Truckbed Liner Gun 1 Each
71109 Premium Undercoat Gun 1 Each
Disclaimer:
The information supplied in this document is for guidance only and should not be construed as a warranty. All implied warranties are expressly disclaimed.
All users of the materials are responsible for assuring that it is suitable for their needs, environment and use. All data subject to change as SEM deems
appropriate.
Users should review the Safety Data Sheet (SDS) and product label for the material to determine possible health hazards, appropriate
engineering controls and precautions to be observed in using the material. Copies of the SDS and product label are available upon request.
© Copyright 2015. "Honest Joy Holdings" All rights reserved.